-
Included items
1 x 15ml Ceramic Coating, 1 x 50ml Surface Preparation Spray, 1 x Microfiber Applicator Pad, 2 x Luxury Microfiber Buffing Cloths
-
Application
Quick and easy to apply
-
Finish enhancement
Superior paint gloss enhancement
-
Texture
Industry-leading slickness
-
Protection
Dirt and grime repellence, UV Protection
-
Hydrophobic properties
Extreme water shedding and hydrophobic properties, Liquid repellence providing a water contact angle of between 100°- 110°
-
Durability
9H Scratch resistance, Chemical resistance, Can last up to 2 years on surfaces*
-
Maintenance benefit
Makes cleaning and maintenance a breeze
-
Durability condition
Ensuring you follow all preparation, application and maintenance instructions included on the packaging.
-
Surface preparation step 1
Thoroughly wash your bike using Nano Tech Bike Cleaner, Punk Powder or Snow Foam, then ensure it is completely dry before starting the coating process
-
Surface preparation step 2
Depending on the condition of the paint or surface, perform the appropriate level of paint correction to remove any defects including swirl marks, water spots, and scratches. Keep in mind this product is very durable and will seal in any imperfections
-
Surface preparation step 3
Remove any excess paint correction or wax/polish residue by wiping all painted surfaces with surface prep spray. Simply spray onto the microfibre cloth and wipe down
-
Application environment recommendation
We recommend applying the coating in a cool, dry, clean area, inside with good lighting and ventilation. For non-factory finishes test a small inconspicuous area prior to full coverage.
-
Coating activation
Shake the bottle thoroughly for 10 seconds to activate the formula.
-
Safety recommendation
We recommend wearing protective gloves when applying the coating.
-
Coating application method
Unscrew the child-resistant cap, then apply the coating sparingly and evenly along the provided microfiber applicator pad. (A little coating goes a long way).
-
Application pattern
Starting at the highest surfaces, work in a crosshatch #, overlapping pattern to ensure all areas are coated. We recommend limiting application areas to the approximate size of 1 bike tube/panel at a time. Relax and take your time, applying slowly and carefully for the best results.
-
Applicator replenishment
Add additional coating to the applicator pad when the coating is not being applied evenly and or the applicator does not glide over the surface smoothly.
-
Curing and buffing
Allow the wet coating to cure for 5 minutes. During this time the coated surface will develop a rainbow-like appearance. In this time check that you have covered all areas. Using the provided microfiber cloth, lightly buff the surface using small circular motions to a high gloss, mirror-like finish. Be sure to check the surface in multiple light angles to ensure all the rainbow effect has been removed. Do not allow the wet coating to cure for longer than 5 minutes and ensure it has all been buffed off.
-
Full cure time
Once buffed off, let the coating fully cure for 24 hours in a cool dry place before exposing it to water or the elements. (For best results and adhesion, we do not recommend washing for at least 48 hours after application).
-
Layering
You can easily layer up the coating with a second application for even longer durability, simply follow the application instructions above after the first layer has fully cured. You do not need to re-prep.
-
Shelf life after opening
Use within 6 months once opened
-
Recommended cleaning products
In order to properly maintain your ceramic coating, we would only recommend cleaning using our Nano Tech Bike Cleaner, Punk Powder, or Snow Foam. Avoid using other solvents or acidic cleaners as these will break down the coating much quicker.
-
Hydrophobic maintenance
Keeping the surface clean will ensure you retain the hydrophobic properties of the coating.
-
Top-up recommendation
If you notice the surface starts to lose some of the hydrophobic water-beading properties over time you can simply top up and refresh the coating. We recommend a top-up every 6 months to maintain optimal performance.